Skydiving Articles - Dropzone.com

Para Gear Photo Submissions For Catalog #84

Para Gear is interested in photographic submissions that you may have for the 2023 - 2024 Para Gear Catalog #84. We have taken the time to briefly describe the format and certain criteria that we look for, in order to help you to see if you have something worth submitting. We have included examples of previous catalog covers for your reference.
Over the years Para Gear has used photos from all of skydiving's disciplines. We do not have a preference as far as what type of skydiving photo it is; rather we look for something that either is eye-catching or pleasing to the eye. In light of the digital age, we are also able to use photos that in one way or another may be less than perfect and enhance them, removing blemishes, flipping images, altering colors, etc.
The following are preferences. However what we prefer and what we get, or choose, are not always the same. If however, we came down to a choice between two photos of equal quality, we would opt for the one that met more of our preferences. We typically prefer that the photo be brighter. In the past, we have used sunset photos and even a night jump photo, although by and large most of the photos are daytime. We like the subject of the image to contrast with the background. Subjects that are wearing brighter more colorful clothing usually stand out more. We prefer to have the people in the photo wearing equipment since that is what we sell. Headgear, goggles, jumpsuits, altimeters, audible altimeters, and gloves are all good. We also prefer to see skydivers wearing head and foot protection.

We do not print any BASE jumping nor any Tandem photographs. No submissions of these will be accepted. We are not interested in any photos of individuals or groups of skydivers standing on the ground
Our basic criteria are as follows:
Vertical Format. The front and back covers of the catalog are both in a vertical format. We can use a horizontal (landscape) shot, as opposed to a vertical (portrait), and then crop it as long as the image lies within a vertical cropping.
Photo Quality. The front and back cover shots will be printed as 8 ½ x 11 in 300 dpi format. Any film that can hold its quality up to this size and print dpi is fine. Digital format is preferred. In the event of a final cover choice, we prefer to be sent the original digital image or slide to get the best quality out of the image.
Back Cover Photo. The back cover photo is no different from the front except in one respect. We need to have room on the left side of the image for the thumb index. In the past we have taken images and been able to horizontally flip them thereby creating this room.

Originality. Anything that is original, eye-catching, or makes someone take more notice of the catalog covers is something we look for. It could be a photo from a unique camera position or angle, a scenic skydive, shots under canopy, landings, etc. We look for photos that have not been previously published and most likely would not accept them if they have, as we want a photo that no one else has seen yet. We also do not want any photos that are chosen as the front or back covers to be used for other non Para Gear advertising for a period of one year. Para Gear offers $500.00 each for both the front and back covers we choose. Our current deadline for catalog cover submissions is November 25th 2022. Sending sample pictures by e-mail to [email protected], If you are sending sample digital pictures please note that they do not need to be in a very large format. If we like the sample picture we will then ask you to send the higher-quality original. Please feel free to contact me directly with any questions.

By Meso, in General, October 28, 2022

Skydiving Gear - Avoiding and Solving Problems

This article is about learning how to “Understand parachute equipment so you can avoid and survive dangerous situations”!
Important gear concepts exist and are always valid, regardless of who makes the gear, where it is used or what someone is telling you about it!
The best way to solve a problem is not to get in a situation where you are forced to solve one, but if you do, you still need to know what to do. How can we do that? The answer is- understanding the equipment and knowing what you can do with it.
Example- being aware that the Reserve pilot chutes can experience spring lock/pilot chute partial malfunction/, will prepare you for the moment if this happens. What can you do in this situation?
There is no one else to rely on up in the sky except you, with your knowledge, skills, and experience. Understanding the equipment can help you avoid and resolve situations.
Equipment concepts have been around since parachutes came into existing and they are the principals that define how and why equipment is designed, manufactured, and used. Therefore, they are independent of arbitrary opinions and politics.
Equipment
1.           Must be a Mechanical system
2.           Must be Functionally sound
3.           Must be Safety compliant
Do these concepts feel familiar in any way?
They are pretty much the principles you follow on every jump to ensure the equipment is safe while doing your checks, post deployment procedures, flying the canopy, etc. etc. All these actions ensure that 1. The mechanical system/parachute/ is 2. Functional and 3. Safe!
This particular article will look at what are the factors defining the parachute equipment as a Mechanical system.
Parachutes need proper environment/atmosphere, gravity, fluids resistance etc./ to work. Even though they were designed on Planet Earth, parachutes successfully worked on Mars, using the same principles https://mars.nasa.gov/news/8875/testing-proves-its-worth-with-successful-mars-parachute-deployment/

The Parachute used for Mars landings

Airplane equipped with emergency parachute
What defines a Parachute as a Mechanical System?
1. The system needs to comprise all its parts!
Learn what are the parachute components of your main and reserve and how they work. Are they all what they should be? Here you can start with your parachute manual!
“Parachute assembly normally, but not exclusively, consists of the following major components: a canopy, a deployment device, a pilot chute and/or drogue, risers, a stowage container, a harness, and an actuation device (ripcord)”. All the parts mentioned are vitally important for the parachute operation. If the pilot chute gets separated from the D bag on deployment, it won’t be able to extract the main from the container causing a malfunction. However, sometimes parachutes can operate with missing parts -D bag can be extracted and thrown on the wind flow manually if the PC is in tow; you can pull the RSL lanyard on some models for a reserve activation. As you can see, knowing all the parts and their function will give you the advantage of extra ability to avoid and solve problems.
When you inspect your gear, you check if all the visible parts are present and connected. Sometimes you are not able to inspect all the parts inside the container, for example when someone else has packed for you but you trust your packer or rigger. That’s where teamwork and cooperation come in to play!
2. The system is real- nothing magical happens up there
Investigate the reasons for accidents and learn the reasons that caused them. Consider what you would have done with your gear to avoid each one of them! Consult with knowledgeable person!
Parachute is a physical system; laws of mechanics and aerodynamics apply. Higher windspeed under the canopy creates lift. Pulling a toggle, creates resistance on this side of the canopy, and it turns in the same direction caused by that increased resistance. Uneven body position contributes to line twists/mains or reserves/, high speed on deployment causes hard openings. There are reasons for everything that happens with the equipment and the consequences. Sounds logical, right? Learn what causes line twists so you can fly your openings and avoid them, learn what causes hard opening so you can pack better and avoid them, learn which canopies fly better in turbulence and get one of them, learn what causes pilot chute in tow and you can avoid them.
Have you personally investigated all accidents that have happened to learn what to do to protect yourself in the future? Really, have you done that, at least for the fatalities you have heard about recently? If you have not- you have holes in your knowledge how to save your life. Take a minute to think about it now! Why haven’t you done that? There are officials that should be able to answer all your questions and are also people on the field that have a lot of answers.
3. Mechanical systems malfunction, both- main and reserve.
Learn what has caused mains and reserves to malfunction or would. Then, think what you can change or do to avoid malfunctions!
Yes, parachutes malfunction, both mains, and reserves. Understanding the equipment can help you identify potential malfunction and reduce the anxiety.
Before jumping, we should know how the canopy we jump would react in different situations. Knowing the difference between 7 and 9 cell canopies, we can anticipate what surprises we can get on opening or while turning with them.
What settings enable your canopy’s optimum glide ability- flying it with rear risers, on 50 % brakes, how effective they are downwind, into the wind? Knowing all that before returning from a long spot can keep you out of troubles.
Most reserves are usually built as 7 cell F-111 square canopies. Why is that? You should know what could contribute or cause reserves to malfunction and avoid these situations. In case the reserve malfunctions, you should know what is possible to do to rectify the situations. Take a minute to think about your options if this happens. What is the design and materials of your reserve? If you have questions- ask someone that knows, not someone of authority that thinks they know.
Ask yourself- are my knowledge, skills, and experience where they should be? Am I doing everything I can to improve them?
It is not manufacturer’s job to tell you everything you need to know, so they don’t, they are companies and have different priorities. Often, federations and associations can be slow with bringing to you the education you need. More than 80% of fatalities are result of human error, don’t become part of this statistic. Educate yourself!
In skydiving there is always someone that knows more than you! Find them and ask! Start with:
Every time, looking or handling parachute equipment, think about it in the context if- 1. The mechanical system/parachute/ is 2. Functional and 3. Safe!
Understanding the equipment will enable you to know what to do in situations you don’t know what to do! A real advantage when it is time to save yourself.
To be continued!
Kras Bankov
GLH Systems
[email protected]

By glhsystems, in Safety, April 10, 2022

Are You Ready?

This article is about today’s crucial importance of education in Skydiving and Rigging and what part of it are procedures and rules.
“You have to be ready for every situation!”- this is a popular expression lately and it makes perfect sense. But what does it mean, how do we prepare in order to be “ready”, what training is necessary, where do we get it, what knowledge do we need, is the training from our first jump course enough, etc. etc.? All good questions. Here, we are going to answer some of them. Obviously, it all comes down to EDUCATION! The right EDUCATION!
In order to survive a skydive we need- knowledge, skills and experience! There is nothing else we can rely on when it is time to resolve any situation up there than ourselves and what we know. Interestingly, in recent years, the concept of “following procedures and rules” has been pushed through Skydiving more and more and now it wrongly has been assumed as the main way of dealing with difficult situations. “Following procedures and rules” is very important, actually it is extremely important. Following procedures and rules means that certain important things are going to get done in the necessary order. This evidently ensures the safety in skydiving to a big extent. Is that enough? Both, the short and the long answers are -NO.

The definition for “Procedure” is- a series of actions are conducted in a certain order or an established or official way of doing something. It is a term coming from the mechanics, and it works well in the factories. Following procedures there ensures things are done the correct way in order a certain process to be carried out. Skydiving, Rigging, training and education are not manufacturing processes. There simply cannot be procedures that cover what will happen on a jump. Every jump is different to some extent, done by different people, from different altitudes, different airplanes, and with different equipment! Equipment checks, packing procedures, post deployment procedures etc are good examples for procedures we use today. They are just part of the education and should not be mistaken for sufficient good training in Skydiving and Rigging. Also, “Procedures” can and have to change often, when situation requires that, especially in emergencies.
So, what exactly is the difference between Procedures and education- following procedures covers only several things that need to be done in specific situations while good education is what prepares us to resolve a wide range of problems in wide range of different situations. There is a big difference between the two!
Unknown situations, Extreme weather conditions/phenomenon/, Unknown equipment and other factors/mostly human ones/ are important part of the education in Skydiving and standard “procedures” do not cover wide range of what happens in these. The insufficient training in these areas is a reason for a big part of the serious injuries and deaths.
Unknown situations- well they happen, and we must deal with them. It is important to know what can help us. Broken control line on deployment, 3000 ft height, no line twist, steerable canopy and the canopy turns. Do you have to cut away? Yes, there’s many answers, and they all depend on the particular situations. Winds, distance from landing area, main canopy, spot, etc, etc, etc.
Unusual and extreme weather conditions/phenomenon/- looks like a good idea to know how to handle strong wind gusts, turbulence, dust devils, etc. Let us say you are at 2000 ft under a good canopy and there is sudden wave of strong wind- 30-40 kts on the surface. This changes your original plan, but you still must land, nobody stayed up there. What is the approach you need now, can you fly your canopy backwards facing into the wind, what are the implications flying the canopy crosswind? Now your knowledge comes to play.
Unknown equipment. What constitutes unknown equipment? Well, obviously the equipment you do not know, and If you do not know what is in your reserve tray- that makes it new when it’s time to use it. A good example is using MAARD systems. After cutaway, RSL opens your reserve tray and initiates the reserve opening sequence regardless in what position you are, sometimes spinning, spinning on your back etc. Any other position than belly to earth, slightly head up is less favourable for the reserve opening.

What is the difference between untreated Spectra lines /PD reserves/ and treated/stiffer/ Spectra lines?
Other factors/mostly human ones/- yes, very important to know how you would react when you are first time in particular situations. If you lack the necessary time and resources/knowledge/ and you are to deal with situation that you do not know how to resolve, the “freeze, fight or fly” response takes into action, and you could forget even the things you knew.

Nowadays, these factors are sometimes left outside the scope of the things considered important in training and in operations. Again- knowledge, skills and experience is what we need, and only good education and training can provide them. Following standard operating procedures are not enough!
Well, if you create a system to do something- do not be surprised it does it!
It is not a big surprise these factors are important and ignoring them causes problems.
Turns out there is a huge amount that can be done, and education is very important.
“The ability to generate and then select the appropriate course of action is based on the decision maker’s “reading” of the situation—in other words, our ability to assess the situation and predict how it will evolve over the next few seconds. “The more knowledge you have on how things work- better chance of reading the situation. Knowing what is in the reserve container, what the closing sequence is, how and when the MARD works, why the RSL was invented and implemented, what the reserve pilot chute is, can affect the way we read and PERCIEVE emergency situations. These things are important and being familiar with them could save your life. In emergency, people have reacted in different way depending on how they see the situation. As a result, if you know how all the equipment works and what you have, often you do not need to stop, think and then act. Action becomes inbuilt into your reflexes- we jump out of the way of fast approaching car before we even think about it. The same thing happens when you are driving a car- you are not constantly thinking how much input you should apply to different muscles of your limbs in order to maintain a straight line- it is all done subconsciously. You need to think only when you the situation changes, and you need to decide which way you need to turn at an intersection.
The alternative is when you do not know how equipment works in emergency situation- you execute only what you are told- pull some handles, hopefully in the right sequence. If this does not go well- you will need a lot of luck because you do not have time! If we are not sure exactly what is the problem, we need time to realise exactly what is happening, to run different simulations and to decide what course of action to take and execute it. In skydiving- we DO NOT have time. Unfortunately, the current Skydiving “Emergency procedures” diagram-based education here simply fails in many aspects.
All these- “Unknown situations, Extreme weather conditions/phenomenon/, Unknown equipment and other factors/mostly human/ factors” are interrelated. Educating ourselves in one of them, significantly improves the overall outcome as this positively affects all other factors. Let us say we significantly improve our knowledge in “Unknown equipment” /how equipment works/, this significantly improves our ability to handle weather phenomenon/very important/, unknown situations/extremely important/, Human factors/increases the competence confidence loop and anxiety level/ and this improves following procedures as they are understood better.
Getting back to- “You have to be ready for every situation!”- it means that we must be prepared as much as possible for what is coming at us in skydiving. We must know how to prevent and handle situations that have happened before, and we need to be able to tackle even situations that have not happened to us or in general.
Unfortunately to me it looks like we were closer to the right education 30 years ago than today. The reasons for that are complex, however the education providing the necessary knowledge, needs to reflect the modern equipment we have, the already gained experience in skydiving, educational psychology etc.
Luckily, we know all this! We just need to implement what we know again!
It is every skydiver’s personal responsibility to learn how to survive after passing their student status.
Do not wait! Ask! Seek information! Learn! Request a good education, your life depends on it! Ask WHY and HOW! If whoever is teaching you, cannot explain WHY and HOW, ask someone that knows!
Where do we start?
You can start with the manuals for your parachutes and AAD!
Kras Bankov
GLH Systems
Photo, courtesy of “Jump Dogs Display Team”

By glhsystems, in Safety, September 20, 2021

gear and rigging

Para Gear Photo Submissions For Catalog #83

Para Gear is interested in photographic submissions that you may have for the 2021 - 2022 Para Gear Catalog #83. They have taken the time to briefly describe the format and certain criteria that they look for, in order to help you to see if you have something worth submitting. They have included examples of previous catalog covers for your reference. http://www.facebook.com/media/set/?set=a.290693934285998.71336.290673160954742&type=3 or /gallery/category/72-gallery_category_72/
Over the years Para Gear has used photos from all of skydiving's disciplines. They do not have a preference as far as what type of skydiving photo it is, rather they look for something that either is eye-catching or pleasing to the eye. In light of the digital age, They are also able to use photos that in one way or another may be less than perfect and enhance them, removing blemishes, flipping images, altering colors, etc.
The following are preferences. However what they prefer and what they get, or choose, are not always the same. If however, they came down to a choice between two photos of equal quality, they would opt for the one that met more of our preferences. They typically prefer that the photo be brighter. In the past, they have used sunset photos and even a night jump photo, although by and large most of the photos are daytime. They like the subject of the image to have contrast with the background. Subjects that are wearing brighter more colorful clothing usually stand out more. They prefer to have the people in the photo wearing equipment since that is what they sell. Headgear, goggles, jumpsuits, altimeters, audible altimeters, and gloves are all good. They also prefer to see skydivers wearing head and foot protection.
They do not print any BASE jumping nor any Tandem photographs. No submissions of these will be accepted. Para Gear are not interested in any photos of individual or groups of skydivers standing on the ground
Our basic criteria are as follows:
Vertical Format. The front and back covers of the catalog are both in a vertical format. They can use a horizontal (landscape) shot, as opposed to a vertical (portrait), and then crop it as long as the image lies within a vertical cropping.
Photo Quality. The front and back cover shots will be printed as 8 ½ x 11 in 300 dpi format. Any film that can hold its quality up to this size and print dpi is fine. Digital format is preferred. In the event of a final cover choice, they prefer to be sent the original digital image or slide for getting the best quality out of the image.
Back Cover Photo. The back cover photo is no different from the front except in one respect. They need to have room on the left side of the image for the thumb index. In the past, they have taken images and been able to horizontally flip them thereby creating this room.
Originality. Anything that is original, eye-catching, or makes someone take more notice of the catalog covers is something Para Gear look for. It could be a photo from a unique camera position or angle, a scenic skydive, shots under canopy, landings, etc. Para Gear look for photos that have not been previously published and most likely would not accept them if they have, as they want a photo that no one else has seen yet. They also do not want any photos that are chosen as the front or back covers to be used for other non-Para Gear advertising for a period of one year.
Para Gear offers $500.00 each for both the front and back covers they choose. Our current deadline for catalog cover submissions is March 1st 2021. Sending sample pictures by e-mail to [email protected], If you are sending sample digital pictures please note that they do not need to be in a very large format. If they like the sample picture they will then ask you to send the higher quality original. Please feel free to contact Curt directly with any questions.

High stress situations- what's the deal?

This should be a relatively simple question, right? After all we learn them before we even go for our first skydive. Some people find it easy and some very difficult to deal with Emergency situations. So difficult that they couldn’t. It all depends how procedures are thought and consequently perceived. Motivations set goals and goals define perception, therefore instructors, manufacturers and riggers might give you slightly different versions on what would work best. Who decides? Education is the key, but only the right education! However, different opinions should be seriously considered as things change. This is very important as we have a strong tendency to reject ideas that fail to fit our preconceptions, labeling those ideas as unworthy of consideration— nonsense, irrelevant, weird, or mistaken

“Of the 308 fatalities that were reported between 1993-2001, 264 (86%) were categorized as Human Error, indicating that human error was deemed to be the principal causal factor in the mishaps”, this study was done in the USA. So 264 people executing emergency procedures during this period made a fatal mistake. The same study concluded that- “Within skydiving training and education programs, specific attention should be given to human error, and training should be deliberately aimed at reducing human error mishaps.” This was concluded 20 years ago. What do you think has been done with relation to this? Not much, and in regards to reducing human error things have gotten even more complicated.

In order to execute the correct emergency procedures, we need to identify the malfunction correctly and perform the correct action from all the available options.

Here’s an example of one way to teach them:

This is just an example. Looks good and it’s in color too, well presented and not that difficult to understand. There are many different types of these around. Are they the real deal?

They should be, if they are around. And are they what the education needs? This type diagrams are consequence of the typical industrial type of education. The idea with the diagrams is that you learn it and when you need to respond to a malfunction situation- just execute the actions! That’s how computers work. Fast and accurate. But that’s not what happens in our heads. We are organic creatures. Skydiving is a high pace activity and we don’t have time to freeze, bring out the diagram with situations from the library, pick the right one and execute it. According to Adler (1991) and Schramm-Nielsen (2001), the decision-making process is comprised of specific stages including the recognition of the problem, search of information, alternatives, assessment of alternatives, selection of an alternative, implementation, control and feedback. Stress can also have an impact on each stage of the decision-making process (Moschis, 2007). Janis and Mann (1977) conclude that perceived stress in the decision-making process is a major cause of bad decisions and errors. And this is understandable- if we don’t know or understand what’s going on- the brain puts us in the pray response- freeze, fight, flight.

Consequently, the following issues arise from the diagram way to learn emergency procedures- our nervous systems are not fast enough and humans are not “Stimuli response machine” when skydiving, nor while acting under any pressure or stress. This “Stimuli response machine” theory of human behavior was from the middle of the last century and it says that when you are presented with a problem, you consider it, make a decision and act. However, this mechanism is true and works ONLY when everything that happens goes to plan, we have time, we are not under pressure and have enough time to think. This rarely happens in real life, let alone when dealing with emergencies in skydiving.

More importantly, diagrams and words are not how we think in skydiving and in general. What? What am I talking about?

A new study led by Elinor Amit, an affiliate of the Psychology Department, shows that people create visual images to accompany their inner speech even when they are prompted to use verbal thinking, suggesting that visual thinking is deeply ingrained in the human brain while speech is a relatively recent evolutionary development.

“This suggests that we can’t really go beyond the here and now and think in abstract ways about other people, places, or times,” Amit said. “This is the way our brains are wired, and there may be an evolutionary reason for this [because] we haven’t always been verbalizers. For a long time, we understood our world visually, so maybe language is an add-on.

“That has important implications because if we are truly grounded in the here and now, what does that mean about how we develop public policy?” she added. “Do we need to help people overcome their bias to focusing on the here and now? This is something we may need to be aware of.”
This is relevant to skydiving as when we think about skydiving we imagine pictures, frames, short clips. Human life and behavior is organized around our vision. This is another fact that separates us from animals as they have their life organized around smell. This is very important as it gives us the ability to build images in our heads and run simulations. But this is only possible if the training goes past the diagrams and involves video or photographs. Hey, it’s not really possible to see what’s exactly happening after you throw your pilot chute so we feel and build pictures in our head of the developing opening sequence. If our brain detects any mismatch with what’s supposed to happen- we are alerted to get ready. RAS is activated.
Visualization is widely used in skydiving. So why did we stop using it for emergency procedures training? I know people that haven’t seen any emergency procedures visual aids since they finished their AFF course 10 years ago. Even worse, it’s actually hard to find updated video of emergency procedures done right in real situation.

If things do not go as planned, the emotional system- the ancient brain takes over and acts. The systems that are activated in the stress situations have been studied in depth. More details are to be in different publication but one good example is the RAS- reticulate activating system, located mainly in the hippocampus. It keeps track of everything that doesn’t go to plan so we can react. This is the system that wakes you up at night if something wrong is happening- loud noise, anomaly in the environment, etc. The same system helps you drive your car when you are brain wondering and think about something else, whatever it is. It will alert you and help make a decision when the traffic light gets red so you can stop in response. What actually happens when things go wrong is – the hippocampus modulates the process there, primes the amygdala in case things go really wrong and it primes the hypothalamus, the part of our brain responsible for exploration /we need to find a solution/. The result is you are ready! The question is how worried should you be? And that depends on how ready you are for the emergency.

The “Stimuli response machine” emergency procedures diagrams have some other inbuilt problems. One is that not all situations that happen are described, so they don’t give you a course of action for them. These should be resolved with the help of autonomous and divergent thinking. In order to do that we need have the necessary information. In skydiving, the necessary information involves equipment education and how parachute systems work. Unfortunately, there’s practically no formal education incorporated for licensed skydivers in this area. In other words, licensed skydivers unless they are riggers, luck the resources they need to deal with some situations. This can lead to developing of negative emotions in skydivers. The chronic overwhelm caused by these negative emotions can also harm the hippocampus, which is crucial for learning: this is where short-term memories, like what we've just heard or read, are converted to long- term memories, so we can recall them later. The hippocampus is extraordinarily rich in receptors for cortisol, so our capacity to learn is very vulnerable to stress. If we have constant stress in our lives, this flood of cortisol actually disconnects existing neural networks; we can have memory loss. We must learn to make our own interpretations rather than act on the purposes, beliefs, judgments, and feelings of others.

So, what should we do? Practice and science show that the more prepared we are, the faster the solution and better the outcome is. How we perceive the situations in skydiving has immense influence on the outcome and the perception depends on our knowledge and experience. The ability to generate and then select the appropriate course of action is based on the decision maker’s “reading” of the situation—in other words, their ability to assess the situation and predict how it will evolve over the next few seconds. If equipment knowledge and understanding the process is in play, then dealing with emergency situations is significantly simplified. “In general, for freefall emergencies they come down to- If your main canopy is out or there’s a reason to believe it can come out- jettison the main and deploy the reserve. If the main parachute is not coming out- deploy your reserve! All these should be done high enough.” Knowing your equipment and how it works also fits the biological reasons to perceive the emergency situations as challenge and not as threat and to get into the competence/ confidence loop which means -less stress. In other words- we perceive the emergency situation as challenge, not threat.

The right education? Well, looks like we need to work on it!

All the above is just scratching the surface on the subject. It doesn’t explain everything and nothing in our brain does one thing only. Also, there are other factors in making decisions under stress too. However, humans have the necessary response abilities to act in high stress situations. They have been developing in the evolution for more than 300 million years. These abilities are very effective and we use them daily in our lives, in sports and even in skydiving. All these should be deeply utilised in the skydive training, not ignored!

Maybe it’s time the available knowledge to be implemented for updating the skydiving education. Skydivers’ safety depends on that!

Kras

Vincent Reffet Dies in Dubai Training Exercise

The legendary French skydiver and BASE jumper Vincent Reffet has passed away during training exercises in Dubai. Vincent's name is most recognizable from his involvement in Soulflyers. He also gained mainstream media attention with his involvement with Yves ‘Jetman’ Rossy and the 'jet-pack'. In 2015, on the heels of extensive training Vincent was announced as Rossy's protégé where he would become the second person ever, aside from Rossy himself, to fly the jet-pack.
A true athlete, Vincent had mastered aerial flying and various disciplines to a level that few are able to. Outside of skydiving and BASE, he was also a wind tunnel instructor and speed rider pioneer. Together with his good friend Fred Fugen, who came from a similar background of skydiving, the two would go on to form a partnership that was well recognized in the industry for their accomplishments together.
At the time of his passing Reffet had amassed a number of accomplishments and records, both in the fields of skydiving and BASE jumping. His most noteworthy recent achievements, as sourced from his Soulflyers profile were:
2017 - Making history by flying into the open door of a Pilatus Porter in mid-air after BASE jumping from the summit of the Jungfrau in the Swiss Alps
2016 - The creation of the MUTANT swooping harness by UPT, a vision that Vince had for a decade prior.
2014 - A 33 000ft altitude mountain swoop (Mont Blanc) and BASE jumping from the world's tallest building (Burj Khalifa)
And this is to name but a few.
Vincent Ruffet was one of few in the sport who transcending the direct skydiving industry, with his achievements almost always being impressive enough to land in the mainstream news outlets and even an appearance on Conan. He became a recognized name for adrenaline junkies around the world.
We'd like to recognize his contributions by paying respect the best way we know how to, celebrating his life by reliving his accomplishments.

Born into a family of skydivers, the thirty-six-year-old Reffet had made his first skydive by the age of 16 and showed no signs of slowing down once he got started. Just two years after making his first jump he joined the French freefly team which was joined by Fred thereafter. Shortly after Fred had joined, the team went on to win the 2004 World Championships in the freefly category.
The rest of Vincent's life would go on to follow a similar formula, being unstoppable in the world of aerial sports, in many cases raising the bar and achieving what few thought possible. And he had achieved all this just within two decades of making his first jump.
The loss of Vincent Reffet is a loss for human flight and our thoughts go out to all his colleagues, friends, family as well as fans.
Read more about Vincent's life and achivements:
Soulflyer's Profile
Redbull profile
BSBD

By Meso, in News, November 18, 2020

Parachute Landing Fall, AKA: The PLF

When first learning to skydive, at least in the US, you attend a first jump course (FJC) that usually lasts between four and five hours on the ground, then you go up in a plane and jump. There are several methods of instruction including Accelerated Free Fall (AFF), Instructor Assisted Deployment (IAD), Static Line (SL), or a combination of the three called the Integrated Student Program (ISP). While all of these methods of instructions are different, they all have one thing in common: gravity. You have to land your parachute. This is where the PLF comes into play. It is also where numerous accidents happen, sometimes due to sliding in, rather than doing a PLF. This is understandable, since tandem pairs land this way for safety reasons. Besides standing up the landings (the preferred method), this is the landings students see most often.
When skydiving first began, all of the equipment was military surplus. This included round canopies, so naturally the PLF was brought along as the safest way to land. Over time, and thanks to the innovation of early pioneers of the sport, the equipment evolved into the square (and now elliptical) canopy, which brought its own problems, like needing a slider to control the opening, and also alleviated the issue with hard landings, mostly. Now, rather than falling more or less wherever the wind blew you, you could steer and fly the canopy much the same as a glider, since the canopy is now a pressurized wing. When you want to land, you fly a landing pattern and pull both steering toggles down and flare, much the same as an airplane would by using flaps. This allows you to bleed off forward speed and land softly standing up (theoretically). Like all things skydiving, when it works, it works really well, but when it doesn't work, it can kill you.
I was a skydiver before going airborne, so when it came time to learn how to PLF, I thought I had an advantage since I had been taught how. Boy was I wrong. They had a platform you climbed on and rode a zip line to gain forward speed and then you let go to learn how to PLF in a simulated landing. I could not keep my feet together, so the Blackhat (instructor) tied my boots together. I had to hop around all day, but I have not had a problem keeping my feet together since.
In airborne school, they take two weeks to train you how to jump out of planes compared to five hours in skydiving. Most of that time is preparing you to land. As there is no way to steer the round canopy other than slipping on landing (pulling the risers to go sideways a little) or facing into the wind, and no way to flare or slow down the speed, the PLF is needed to prevent injury. I have seen a jumper fall about 50 feet and do a PLF and walk away with a few bruises.
While I understand that time is limited and it is hard to prepare a student for all possibilities, I feel that more time should be spent on PLFs during the FJC, at least an hour, and that students should do at least five correct PLFs before every jump. This is standard procedure before doing an airborne jump, and includes all jumpers being led through the entire jump by a jumpmaster, including their emergency procedures. If we put every student through this before every day of jumping, it would help prevent injuries.
The reason students choose to slide in rather than PLF is observation. Since this is the way a tandem pair lands in order to prevent injury, it is assumed to be safe. It is, when properly taught. It is easier to injure yourself sliding in or trying to run out a landing than doing a PLF. I know of at least two serious injuries sustained sliding in that a proper PLF would have prevented. One case ended with a cage around the lower vertebrae.
I made a jump at an unfamiliar DZ on rental gear and the winds were a little high, about 15 mph, so I ended up landing long. When I turned on final, there were some power lines in front of me and I was headed straight for them. I turned around and did a downwind landing, and a PLF into the hard-as-a-rock, newly plowed field, ending up with some scratches when I landed. I was going about 20 mph forward speed. Had I slid in or tried to run it out, I would most likely have broken something. Another time I jumped at an unfamiliar DZ, I chose to PLF instead of running it out, and while walking back stepped in a gopher hole. Had I hit that while running out the landing, I would have broken my ankle.
A proper PLF has five points of contact: the balls of the feet, calf, thigh, buttock, and pull-up muscle (deltoid). When you prepare to hit the ground, keep your feet and knees together, slightly bent, in preparation to absorb the impact. When you fall, hit all the points of contact in order, while rolling on the ground. A proper PLF will allow you to absorb all of the energy and dissipate it by rolling, rather than staying stiff and breaking bones or tearing ligaments and tendons. I kick my feet together when approaching my landing to ensure my feet are together and knees bent, ready to hit the ground and roll. That way, if I don't bleed off enough speed to land standing up, I am already prepared to roll and do it without thinking. If I am going slowly enough, I have a nice stand up landing. Although the goal is standing it up, it is best to be prepared for a PLF, especially if you are fond of your ankles and spine.
Blue skies.

Article written by @sfzombie13

By Meso, in Safety, October 12, 2020

Global Skydiving Equipment Industry (2020 to 2027) - Market Trajectory & Analytics

Press Release
The "Skydiving Equipment - Global Market Trajectory & Analytics" report has been added to ResearchAndMarkets.com's offering.
The publisher brings years of research experience to the 6th edition of this report. The 276-page report presents concise insights into how the pandemic has impacted production and the buy side for 2020 and 2021. A short-term phased recovery by key geography is also addressed.
Global Skydiving Equipment Market to Reach $1.4 Billion by 2027
Amid the COVID-19 crisis, the global market for Skydiving Equipment, estimated at US$1.1 Billion in the year 2020, is projected to reach a revised size of US$1.4 Billion by 2027, growing at a CAGR of 3.5% over the analysis period 2020-2027.
Container or Harness System, one of the segments analyzed in the report, is projected to record a 4.3% CAGR and reach US$610.5 Million by the end of the analysis period. After an early analysis of the business implications of the pandemic and its induced economic crisis, growth in the Canopy segment is readjusted to a revised 3.3% CAGR for the next 7-year period.
The U.S. Market is Estimated at $293.4 Million, While China is Forecast to Grow at 6.5% CAGR
The Skydiving Equipment market in the U.S. is estimated at US$293.4 Million in the year 2020. China, the world's second largest economy, is forecast to reach a projected market size of US$292.5 Million by the year 2027 trailing a CAGR of 6.5% over the analysis period 2020 to 2027. Among the other noteworthy geographic markets are Japan and Canada, each forecast to grow at 1% and 2.6% respectively over the 2020-2027 period. Within Europe, Germany is forecast to grow at approximately 1.7% CAGR.
Jumpsuit & Helmet Segment to Record 2.3% CAGR
In the global Jumpsuit & Helmet segment, USA, Canada, Japan, China and Europe will drive the 1.9% CAGR estimated for this segment. These regional markets accounting for a combined market size of US$202.1 Million in the year 2020 will reach a projected size of US$231 Million by the close of the analysis period. China will remain among the fastest growing in this cluster of regional markets. Led by countries such as Australia, India, and South Korea, the market in Asia-Pacific is forecast to reach US$193.4 Million by the year 2027, while Latin America will expand at a 3.1% CAGR through the analysis period.
Competitors identified in this market include, among others:
Aerodyne Research, LLC LB Altimeters Mirage Systems, Inc. Sun Path Products, Inc. Velocity Sports Equipment Key Topics Covered:
I. INTRODUCTION, METHODOLOGY & REPORT SCOPE
II. EXECUTIVE SUMMARY
1. MARKET OVERVIEW
Global Competitor Market Shares Skydiving Equipment Competitor Market Share Scenario Worldwide (in %): 2019 & 2025 Impact of Covid-19 and a Looming Global Recession 2. FOCUS ON SELECT PLAYERS
3. MARKET TRENDS & DRIVERS
4. GLOBAL MARKET PERSPECTIVE
III. MARKET ANALYSIS
IV. COMPETITION
Total Companies Profiled: 42 For more information about this report visit https://www.researchandmarkets.com/r/nxrtr
This article first appeared on Businesswire

By Meso, in News, September 16, 2020

How safe is your reserve

Well, it’s a fair question!
“Parachutist”, the official publication of the US parachute Association published:
Malfunction, Malfunction, Malfunction—The 2017 Fatality Summary
by Paul Sitter
Sunday, April 1, 2018
“Reserve systems—which include the reserve container, pilot chute, bridle, freebag and canopy—are extremely reliable, but there are no guarantees in skydiving. Looking at the last 10 years, reserves failed to save jumpers in about 6 percent of the fatalities. “
The assumption that properly executed emergency procedures at the right height is enough for the reserve to open is just not entirely true! Reserve malfunctions are fact of life!
We learn something every day in skydiving…..if we want to…Which brings the question- how familiar are you with the reserve parachute emergency situations and procedures?
There are numerous factors that affect the reserve openings- container, pack tightness, container materials, body position, MARD systems and packing techniques. Nowadays more skydivers use MARD systems that put them in not that favourable position for the reserve to open.
The following PIA investigation gives some clarity and recommendations on some reserve openings:
https://www.pia.com/wp-content/uploads/PIA-TR-401LowReserveOpeningInvestigationReport91316.pdf?fbclid=IwAR23JVBJHs8yHajcKIRSVbbYpSfbuNXMalH10d9gJzYHSrZcu7t2ui1XQrM
But can something be done while packing reserves in order to reduce the risk of malfunction?
Skydiving history has shown that neat pack jobs open better than messy ones! The ones that are packed with consideration for the opening, add even more to the safety. That’s why we don’t pack reserves flat pack, it just doesn’t make sense anymore and It used to be the standard.
Things change!
Reserve packing techniques that take into consideration the development of the sport and parachute designs are possible, available and can make the sport safer! They involve techniques that significantly increase the reliability of the reserve parachutes openings! Here are some of them:
1.       Realistic way of placing the slider during packing. This has several functions – ensures the slider is inflated at the same time or even before the rest of the canopy. It is very important, especially in terminal openings and also ensures slider is not launched down the lines immediately after coming out of the freebag. This also ensures the slider is inflated symmetrically, allows proper separation for the four line groups and time for the load on the lines to be more evenly distributed!
2.       S- folding the reserve canopy before inserting it into the Free bag that ensures the least form memory is present on the lines above the slider! Form memory, stiff lines and uneven line tension are the main reasons for tension knots. The specific canopy S folding also ensures the least changes in the canopy alignment when inserting it into the free bag.
3.       Additional separation of the line groups, ensure their full separation before stowing them into the Freebag!
4.       Freestowing the lines using figure 8 pattern that doesn’t allow the different bights to mix disorderly lines between each other! It is used for high bulk lines with form memory that need to be stowed in small compartment stowing pouch! This ensures orderly extraction of the lines from the free bag!
Skydiving as well as skydiving equipment, materials and rigging are in constant evolution!
We challenge the status quo because skydiving equipment, education and techniques can be improved in order to increase safety. Equipment development and modification are driving force in the evolution of our sport.

GLH Systems

By glhsystems, in Safety, September 7, 2020

Performance Designs Releases the Sabre3

By Administrator, in Gear, June 8, 2020

This Site Is For Sale

Sign In

Sign In

Skydiving News and Articles

Select A Category

Pick a Category