This Site Is For Sale
Search the Community
Showing results for tags 'intrudair'.
Found 29 results
-
.png.e2da46aa27336f16116c233c068dd213w9krf.png)
Intrudair proudly presents the new member of our high performance wingsuit line, The RS Base edition. During the development, we focused on maximizing its performance, safety and controllability. Thanks to the new air inlet design, the suit's pressurization is insanely rapid (2 sec), providing an extra fast start. The inner airflow system pushes the suit to shape - both arm and leg wing - almost instantly. Featured properties: - Nearly instant usability after exit. The suit can be quite aggressive, but we also focused on safety and usability features. - During relaxed flight, it's quite easy to control, after stepping in line it's still agile and smoothly controllable. It can go back to relaxed flying in an easy transition. - Easy to pull, deployment is complication free. Main Features: - New air inlets (unique in the market)- extreme fast inflating - Leading edge with high performance material, with an additional medium soft performance foam. - The rib count has been doubled, providing extra smooth wing surface - Foam filled booties, shape-preserving design for better stability -
Baracuda Power Plus is the first one of our new generation variety for wingsuit products.As its name includes the fact, this suit is more robust version of Baracuda Power, meantime by preserving the easy handling feature together with stability and speed. Power Plus has more arm wings surface, so that is why the performance gets bigger, which improves the flare and glide ratio. Backflying: thanks to the new wings and leading edge the accomplishment of the backyling just got improved, and all the transitions became more easy and even more smooth. The main purpose of our development was to achieve a powerful, although easy to handle acro-power wingsuit. We provide the suit’s stability, with a brand new bootie formation, we could make by doing some modification on both legwings. Leading edge: We can send it with two type of performance foam. Either Soft and Power foam, which material was developed only for this purpose. It has 3 different layers, with a outer smooth coating- foam one in the middle- and a lower layer with net surface, which gives the important stability factor for the suit. Thanks to those improvements the leading edge’s aerodynamic, and shape are better, which means more performance even. On the first third of the armwings, and both esc sleeves got more than doubled amount of ribbs. So currently Baracuda Power Plus has the most dense ribbs system on each arms at the wing suit market. We want to assure You that Power Plus is not a nurtured model at all, since we are talking about a completely new 100 % new generation member of Intrudair wing suit product range. New Leading Edge: Thanks to the new leading edge, dense armwing ribbing and legwings tail design, the suit's performance and flare increased by at least 10-20%, this way the suit can catch up with the older, larger wing-surfaced models. Also the smoothness provides extra agility, easy handeling and stability. -
.png.7b1573143015f3aa9961e04d3c22077fo3oj0.png)
When developing this suit, we kept in mind the comfort of jumpers with the help of a wearable suit. There have been new suit trends are occurring in the sport of skydiving worldwide latley. So we modified our freefly design to create a tighter and cleaner suit. The silhouette of the suit narrowly follows the anatomy of the body with a homogenic material use and 3D elbow and knee formation. The suit is tightly tailored on the upper parts of the body and around thighs. The elastic parts around the shoulders, between legs and side of the body will allow you to move much more comfortably. This model has been designed for use in the sky, but you can use it in the windtunnel without any problems as well. Do you want a unique suit? We can now print on taslan 4-ply to create a truly one off design. Choose your own look! When creating a normal speed suit, we suggest selecting taslan material on the body, arms and legs. For a fast, tight suit please choose a nylon front and upper arms. The knee and elbows are made from cordura 1000. The elastic parts will be manufactured from Brunico WX windproof felxible and strong highly quality material and the zippers are made from YKK The Extra options possible are to have an outside pocket, Cordura 1000 Bottom, freefly grips on the arms and legs and printed materials. -
When developing this suit, we kept in mind the comfort of jumpers with the help of a wearable suit. There have been new suit trends are occurring in the sport of skydiving worldwide latley. So we modified our freefly design to create a tighter and cleaner suit. The silhouette of the suit narrowly follows the anatomy of the body with a homogenic material use and 3D elbow and knee formation. The suit is tightly tailored on the upper parts of the body and around thighs. The elastic parts around the shoulders, between legs and side of the body will allow you to move much more comfortably. This model has been designed for use in the sky, but you can use it in the windtunnel without any problems as well. Do you want a unique suit? We can now print on taslan 4-ply to create a truly one off design. Choose your own look! When creating a normal speed suit, we suggest selecting taslan material on the body, arms and legs. For a fast, tight suit please choose a nylon front and upper arms. The knee and elbows are made from cordura 1000. The elastic parts will be manufactured from Brunico WX windproof felxible and strong highly quality material and the zippers are made from YKK The Extra options possible are to have an outside pocket, Cordura 1000 Bottom, freefly grips on the arms and legs and printed materials. -
When developing this suit, we kept in mind the comfort of jumpers with the help of a wearable suit. There have been new suit trends are occurring in the sport of skydiving worldwide latley. So we modified our freefly design to create a tighter and cleaner suit. The silhouette of the suit narrowly follows the anatomy of the body with a homogenic material use and 3D elbow and knee formation. The suit is tightly tailored on the upper parts of the body and around thighs. The elastic parts around the shoulders, between legs and side of the body will allow you to move much more comfortably. This model has been designed for use in the sky, but you can use it in the windtunnel without any problems as well. Do you want a unique suit? We can now print on taslan 4-ply to create a truly one off design. Choose your own look! When creating a normal speed suit, we suggest selecting taslan material on the body, arms and legs. For a fast, tight suit please choose a nylon front and upper arms. For loose / slow suit order using polycotton only. The knee and elbows are made from cordura 1000. The elastic parts will be manufactured from Brunico WX windproof felxible and strong highly quality material and the zippers are made from YKK The Extra options possible are to have an outside pocket, Cordura 1000 Bottom, freefly grips on the arms and legs and printed materials. -
.png.6ab9708e27c7486d9d71bd0c94552411d33zu.png)
When developing this suit, we kept in mind the comfort of jumpers with the help of a wearable suit. There have been new suit trends are occurring in the sport of skydiving worldwide latley. So we modified our freefly design to create a tighter and cleaner suit. The silhouette of the suit narrowly follows the anatomy of the body with a homogenic material use and 3D elbow and knee formation. The suit is tightly tailored on the upper parts of the body and around thighs. The elastic parts around the shoulders, between legs and side of the body will allow you to move much more comfortably. This model has been designed for use in the sky, but you can use it in the windtunnel without any problems as well. Do you want a unique suit? We can now print on taslan 4-ply to create a truly one off design. Choose your own look! When creating a normal speed suit, we suggest selecting taslan material on the body, arms and legs. For a fast, tight suit please choose a nylon front and upper arms. The knee and elbows are made from cordura 1000. The elastic parts will be manufactured from Brunico WX windproof felxible and strong highly quality material and the zippers are made from YKK The Extra options possible are to have an outside pocket, Cordura 1000 Bottom, freefly grips on the arms and legs and printed materials. -
When developing this suit, we kept in mind the comfort of jumpers with the help of a wearable suit. There have been new suit trends are occurring in the sport of skydiving worldwide latley. So we modified our freefly design to create a tighter and cleaner suit. The silhouette of the suit narrowly follows the anatomy of the body with a homogenic material use and 3D elbow and knee formation. The suit is tightly tailored on the upper parts of the body and around thighs. The elastic parts around the shoulders, between legs and side of the body will allow you to move much more comfortably. This model has been designed for use in the sky, but you can use it in the windtunnel without any problems as well. Do you want a unique suit? We can now print on taslan 4-ply to create a truly one off design. Choose your own look! When creating a normal speed suit, we suggest selecting taslan material on the body, arms and legs. For a fast, tight suit please choose a nylon front and upper arms. The knee and elbows are made from cordura 1000. The elastic parts will be manufactured from Brunico WX windproof felxible and strong highly quality material and the zippers are made from YKK The Extra options possible are to have an outside pocket, Cordura 1000 Bottom, freefly grips on the arms and legs and printed materials. -
When developing this suit, we kept in mind the comfort of jumpers with the help of a wearable suit. There have been new suit trends are occurring in the sport of skydiving worldwide latley. So we modified our freefly design to create a tighter and cleaner suit. The silhouette of the suit narrowly follows the anatomy of the body with a homogenic material use and 3D elbow and knee formation. The suit is tightly tailored on the upper parts of the body and around thighs. The elastic parts around the shoulders, between legs and side of the body will allow you to move much more comfortably. This model has been designed for use in the sky, but you can use it in the windtunnel without any problems as well. Do you want a unique suit? We can now print on taslan 4-ply to create a truly one off design. Choose your own look! When creating a normal speed suit, we suggest selecting taslan material on the body, arms and legs. For a fast, tight suit please choose a nylon front and upper arms. For loose / slow suit order using polycotton only. The knee and elbows are made from cordura 1000. The elastic parts will be manufactured from Brunico WX windproof felxible and strong highly quality material and the zippers are made from YKK The Extra options possible are to have an outside pocket, Cordura 1000 Bottom, freefly grips on the arms and legs and printed materials. -
When You don’t want to change a full suit, but need some wings. Optimal choice for cameraflyers with many useful features. Thanks for the massive hip part the jacket is staying in position while You are jumping. But still comfortable because it has kind a lot elastic modules. Main material is 4-ply taslan, wings are made by nylon on the front and taslan on the back. Created based on opinions of experienced cameraflyers. For example, You can add outside pocket to the lower arm, in case You need a lens cleaning wipe or just to hold lens covers, etc… But thumb loop and cord for tense the wings are basics. Mesh lining inside. Available in 4 different wing sizes: sit, small, normal and big. 1. Sit wing 2. Small wing 3. Normal wing 4. Large wing RSL shackles is default (free), normally the wing attachment is a strong carabineer. Custom embroideries and prints are available. -
Optimal choice for those who don't prefer full body suits, but prefer the performance of the booties. We recommend it against the summer heat. The target audience for these pants are mainly AFF instructors, big way lovers, and every belly fliers who want to be more agile with the booties. Normal straight fit cut, power booties with two options (tighter bootie with zip, and a bit loose one with rubber stretch around the heels. There is a new feature, that you can ask for extra grips so it can be used in formation skydiving or big way with a T-shirt (or with a loose fit jacket, or camera jacket). The pants are made by taslan basic material, cordura knees and booties, and some elastic parts between the legs. -
Intrudair's hybrid suits are the DBC series which are 50% skydiving and 50% tunnel flying. This type of suit can be used both places, and it corresponds 100% to the requirements of modern freefly skydiving and either indoor skydiving. By default, the suit has a tight tayloring, and comfortable elastic elements on the joints of your body. The assembly stitching is made of strong nylon yarn in soft smooth sytle. We reinforced the knees with cordura 1000, the bottom patch is optional. -
This suit is a multispeed suit, fit cut on the body with strong elastic parts for the comfortable movement. We recommend it for AFF instructors who don’t like change the suit when go back to back loading. You can set the speed of the suit by multispeed zipper. You can order your suit with different speed: -fast-normal speed (light weight jumper -normal-slow (normal weight jumper) -slow-extra slow (for heavy weight jumper) Contain: -cordura knee and bottom -elastic parts on the back and between the legs -multispeed arms and legs with -one inside on outside packet -nylon sewing and YKK zipper Extras: -Separate jacket and pants -air conditional vents for the hot days -extra pocket for the radio -extra DZ embroidery -
It was developed for many years to be the most comfortable, strongest and most appropriate for it's goal, using the advice and requirements of many experienced pilots and groups. You can order it from many kinds of materials, with different kinds of grips and extras, according to your needs, from the basic to the full extra type. Includeing: Bootie, inner pocket, grips on the arm and legs, strengthenned cordura or parapack knee, double bottom-patch. Available extras: Double grips on the upper-arm, extra heel on the bootie, bootie with air-pocket, soft knee-patch, extra pockets on the upper-arm/ thigh/ bootie, special lower-arm, extra embroidery. -
The biggest winged performance suit of Intrudair. Manta is offered for the lovers of slow speed flying. The characteristics of the Manta enable you to keep flying for the longest period. We did our best. It is your turn now. Mantra is recommended for experienced wingsuit fliers (min 100 -150 flights). Your gliding ratio can reach even 3. This is absolutely the best gliding suit, but is considered fairly good overall (speed, flying time). If you order it with backflight option, you will get a suit designed for both normal and back flight. The suit are made of zero porosity, strong parapack material. It takes short time to fix tight with (YKK) shoulder zippers, and the long massive (YKK) body zipper gives you perfect comfort. Extra big arm wings, with flat trailing edges. With extended arm wing grips air holes with air-lock system foam stiffened leading edges at the arms arm wing cutaway systems wide straddling, longer leg wing, stiffened cells and extra air inlet are ensured for the fastest start, for reaching high horizontal speed, solid and stable flying leg wing deflector massive full-open zipper (YKK 1cm) easy to use with the string shoulder zippers knife pocket, one inside pocket B.A.S.E packet (optional) foam stiffened bootie (optional) magnetic leg wing fixing (basic) front pocket, opening from outside (optional) -
A unique, specially cut, high performance suit from Intrudair. It can be flown at high horizontal speed. The suit has pitched arm position and extra sized wing surface. Shark is designed for experiences wingsuit pilots (min 100 -150 flights). Perfect for B.A.S.E. Jumps, but only for experienced jumpers. Your gliding ratio can reach 3. It provides stable flight, and the angle of incidence and cut of the arm wing provides comfortable position for your arms during flying. The suits are made of zero porosity, strong parapack material. It takes short time to fix tight with (YKK) shoulder zippers, and the long massive (YKK) body zipper gives you perfect comfort. The extra big arm wing – extra material next to the body offers the best performance and distance glide. sleek trailing edge on the arm wings flaps with air-lock system longer arched arm wing grips are easy to hold foam linings on knee area high speed wing profile wide straddling, longer leg wing, stiffened cells and extra air inlets are ensured for the fastest start, for reaching high horizontal speed, solid and stable flying leg wing deflector arm wing cutaway systems back flaps for back flight (optional) massive full-open zipper (YKK 1cm) easy to use with the string shoulder zippers knife pocket, one inside pocket B.A.S.E packet (optional) foam stiffened bootie (optional) magnetic leg wing fixing (optional) leg wing cutaway system (optional) -
The Barracuda is a new category in the Intrudair wingsuit range. It was designed for “performance acro” whilst being easy and comfortable-to-fly. Versatile for normal and inverted flight, flock, camera and acro flights. Thanks to specialized wing surfaces and arm wing/leg wing ratio. The angle and position of the arm wings are fine tuned to maintain maximum wing area with minimal muscle strain throughout the entire flight due to optimized effectiveness of the surfaces along the body. We gave extra attention to the wings to avoid any interference with canopy deployment, so while flying the Barracuda, the clean reach for the pilot chute is completely effortless in all situations. We also increased the leg wing surface to maintain optimal arm wing / leg wing ratio, resulting in a bit of excess leg wing extending behind the feet. We spent a great amount of time and effort to find the optimal air inlet sizing for super quick pressurization, and the air lock valves maintain maximum pressure in the wings even in inverted flight or while rolling from inverted back to normal and vica versa. We also spent time creating the “Anti-Collapse System” reinforced air inlets, preventing the inlets from closing in any and all body positions, making the suit with easy Pilot Chute deployment perfectly safe for BASE jumps. The wing surfaces and leading edges are very smooth, the size of wing cells enable both fast and slow flight with the suit. The Barracuda can be a next step after the Piranha, an ideal choice for flocking or other enhanced flying, for intermediate and advanced wingsuit flyers. Main features - Smooth leading edges - Easy-to-hold the extra wing surface along the body - Big air inlets on the wings, quick pressurization, fast start - Air lock valves, “Anti Collapse System” reinforced front inlet system - Adjustable arm wing pressure - Arm wing cutaway system - Maximum arm wing span, yet easy reach for pilot chute - Zip Up Cord (optional) - BASE soles for max grip (optional) - Slit for belly camera (also pocket function) (optional) -
Comfortable, totally safe, very easy to control and moreover PIRANHA has also tremendously high-capacity. The medium sized PIRANHA considered to its surface is wondrously powerful. Our company would love to recommend this product to skydive, flotta flying, and acro moreover it is very secure and even effective for proximity BASE flights. The second-generation of PIRANHA has more settled cut with smooth wingsurface equally in front and back side. Our professionals have been working a lot on leading edge of armwings, since it considered to be the most important part of all types of wings which can be used in flight. We created them smooth and made sure that pressure can flow from the armwings into leading edges which can provide a perfectly smooth surface during flying. This technique is uniqually used by INTRUDAIR on the wingsuit market. The surface and relations of the wings are not changed since it proved very good on previous version. Many people like the extra surface next to hips and You can also take advantage of it in flotta or acro flying. Sponge is used everywhere in the BOOTIE, so they became even smoother, more aerodynamic and offbeat. Bigger air inlets on the arm and legwings are made, the air-lock system can close even more perfect also on the back and front side fly. RESULTS: Very fast explosive charge and more pressure on the wings. To sum up all these fragments are made in the PIRANHA2, so it became stronger, faster, and more comfortable on unique kind of that it did not go at security or even control’s cost. QUALITIES: Bigger air inlets, better air lock system, smooth surfaces, sponge BOOTIE, leadingedge and armwings, unfastend system, fast shoulder’s zipper OPTIONS: Base sole, backside inlets, extra pockets, possibility of record camera in stomach part, BASE pocket with opening screen. -
Only for experienced flyers! Based on experience gathered from our previous suits and feedback provided by professional BASE-jumpers we are proud to introduce our latest high performance tracking suit: THE INTRUDAIR ULTIMATE. The ULTIMATE is a truly powerful tracking suit. Recommended for experienced BASE-jumpers and trackers. The extra loose pants and loose jacket provides a fast yet flat flight. The unique air inlets helps the jumper to go in a tracking position almost immediately. A significant amount of test jumps were crucial to realise and produce the optimum potential of the suits. The tests were specifically designed to develop and achieve the following aspects; ideal positioning of the air inlets, perfect ratio between the pants and the jacket, as well as the prime position of the deflector on the back of the suit, which results rapid inflation and solid pressurization during flight. Technical details: Main material: strong nylon. Wind- and waterproof zip to keep the pressure inside the suit. Pants: The ankles secured with velcro and press stud for maximum safety. Two pockets on the outside for a phone or radio, etc. Cordura knee and bottom is optional if required for hard usage. Jacket: Always with comfortable lining, 2 outside pockets. Thanks to the innovative solution, the reinforced air inlets can not be closed. The diameter of the inlets have been increased. The layout of the inlets also have been optimised. -
Intrudair proudly present the latest update of our entrance level all-around wingsuit. Because the original wing surface worked perfectly, there was no need to change it. The main difference is that we adapted the leading edge solution from the barracuda series. It comes with a custom developed material, and a special cut. We also added a soft performance foam, which improves the performance significantly. The shape and thickness of the booties has been improved, this way the suit gained more stability and controllability. The complete shoulder zip-system had been changed aslo, optimized for 99% of the rigs. This is an ideal and long-term choice for first wingsuit with wide range of usability, not only for beginners! With Piranha 4 you will get a small surface, super easy to control, significant performance, easy and safety pull all around suit. New Features - same leading edge cut and material as our high performance suits' - soft performance foam added - back fly option, unique stability - new bootie shape - anti-slipping vibram soles - inside pocket Recommended for Beginners, flockers, acro-flyers and FUN-Jumpers as well. -
This suit specified to body flight, designed for the new generation of freeflyers. It has tighter and snugger cut that makes skydiving more accurate since there is no baggy surface. It’s tight at the chest, waist and hip,and the arm and leg part have straight cut. Elastic instertions on the back and between the legs enable the greatest free movements. We recommend strong elastic strip for the wrists and ankles. Your freefly suit can be made of different materials, depending on the desired speed of the suit. And you can choose 3 different looseness: narrow – normal – loose. -
We built this suit for tandem passengers or DropZone Staffs. Sizes: XS, S, M, L, XL, XXL Suit advantages: - cordura bottom - double material on the knees - rubberized back - strong nylon thread - YKK zips - extra embroidery possible -
Everybody who wants to film successfully in the air needs a camera outfit. You can move with the highest speed in this outfit with the appropriate wing-size, making things easier for you. You can order it with several extras. Including: A zipped, inner pocket, an opening-proof, outer pocket on the thigh and the lower-arm, double knee- and bottom-patch. Available extras: Cordura knee- and bottom-patch, soft pad on the knee, extra pockets, bootie, grips, freefly-friendly solution, RSL carabine-swivel wing-fastening, extra embroidery. -
Indoor Skydiving is becoming more popular. We care about jumpmates who fly in the tunnel, so this technical suit has been made especially for them. Tight cut, strong materials, minimal design to avoid the flying off parts. Really comfortable thanks to the windproof neopreme materials. Height of the neck and looseness of the lower arms and lower legs. Available options: nylon front, elbow protector, knee protector. -
The development of the Intrudair Tracking Suit started in 2005 when some Hungarian base jumpers visited me and came up with the idea of ‘sliding-pants’. The development and testing phase started here troughout many-many jumps. It was tested from plane, hot-air balloon, high cliffs, ariels. We measured its performance with GPS and evaluated the new improvements. So the final version, the Intruder Track Suit, was born by the beginning of 2012. EXTRAS:New placed air openings for the fastest filling up. There is a zero-air-permeability material in the pants to keep the arising pressure. Removable bootie for the extra big flyings, this can be detached so the suit can be also perfectly used for freestyle tricks. Knee and bottom re-enforcement panels for the failed landings. There are .air-openings with wing-stretching rubber on the jacket too, this takes care of the optimal wing profile. Pockets with zip for the keys, phones and there is an extra pocket for the stash bag. ADVANTAGES: Very fast horizontal speed, free arm movement. -
Everybody who wants to film successfully in the air needs a camera outfit. You can move with the highest speed in this outfit with the appropriate wing-size, making things easier for you. You can order it with several extras. Including: A zipped, inner pocket, an opening-proof, outer pocket on the thigh and the lower-arm, double knee- and bottom-patch. Available extras: Cordura knee- and bottom-patch, soft pad on the knee, extra pockets, bootie, grips, freefly-friendly solution, RSL carabine-swivel wing-fastening, extra embroidery.
