Ozone
The 7-cells main parachute for beginning parachutists and parachutists with an average level of preparation. If you’re the parachutist of the day off or do not aspire to become the pro on swoop and do not catch ground rash – that is your parachute! Recommended wing loading from 0,8 to 1,6.
The design of Ozone’s air inlets differs from others 7-cells canopys (lengthening no more than 2.2, the top and bottom coverings from ZP). The bottom panel is extended up to the top covering on intermediate rib. Thanks to application of this scheme of air inlets, frontal resistance has decreased. We have applied the scheme of an arrangement of unloading apertures in strong and intermediate ribs, similar to paragliders, to compensate decrease of air- pressure inside of the covering. All ribs are produced from ZP. The back edge of a canopy is slightly oblique.
Canopy-shaped slider does its bit! The parachute opens softly, without jerks/
The parachute is equipped by lines Microline. Company ParAAvis uses by manufacture of these parachutes a fabric with zero air permeability Soar-Coat (USA), having a resource not less than 1000 jumps.
The design of Ozone’s air inlets differs from others 7-cells canopys (lengthening no more than 2.2, the top and bottom coverings from ZP). The bottom panel is extended up to the top covering on intermediate rib. Thanks to application of this scheme of air inlets, frontal resistance has decreased. We have applied the scheme of an arrangement of unloading apertures in strong and intermediate ribs, similar to paragliders, to compensate decrease of air- pressure inside of the covering. All ribs are produced from ZP. The back edge of a canopy is slightly oblique.
Canopy-shaped slider does its bit! The parachute opens softly, without jerks/
The parachute is equipped by lines Microline. Company ParAAvis uses by manufacture of these parachutes a fabric with zero air permeability Soar-Coat (USA), having a resource not less than 1000 jumps.